Our Services

Expert advice – our temperature engineers will work with you to design the best solution
for your requirements.

Customisation – if your requirements can’t be met ‘off the shelf’, we’ll customise a
solution just for you.

Installation and training – we’ll install the products and train your teams so you can get
the best from your temperature control solution.

Change management – if you need configuration updates or changes, we’ll manage
them for you.

Warranty and maintenance – we’ll carry out regular servicing to prevent most
problems. If you do have an issue, we’ll swap or repair the equipment as part of our
operational maintenance service.

Sensors

Sensors are essential for temperature management applications – from the simplest to the most technically complex, and for measurement of non-temperature data. ECEFast provides sensors for a wide range of measurement applications.

Temperature sensors – to capture the temperature of anything from the inside of a concrete block to a food manufacturing or storage facility, to a laboratory fridge, a kiln, or a delivery truck.

Infrared temperature sensors – for temperature measurement with no physical contact.

Non-temperature sensors – to capture data including level, flow, speed (RPM), weight, sound level, vibration, Co2, O2, PH, current, voltage, frequency.

Customised sensors – in-house design, development and manufacture of custom sensors to meet your specialist requirements. We can customise an existing sensor, or design and manufacture a new one from scratch.

Embedded sensors – for use inside material such as concrete, in the ground (for example near a volcano), or inside a waste container.

Probes – for food preparation and food safety.

Thermocouples – specialist cabling to connect controllers and sensors for efficient and accurate operation.

RTDs – Resistance Temperature Detectors

Sensor accessories – cable and connectors, thermowells and protection tubes.

Our specialist engineers will help you define your exact requirements and get you exactly the right sensor for the job.

Locally made

We design and build our sensors in our own facility in Australia. We use Lean Manufacturing practices to produce high quality products with short lead times and competitive pricing.

Frequently requested products are pre-manufactured and available for immediate delivery. Custom sensors are manufactured to spec and shipped within a few days.

• Speed to market
• Highest quality
• Custom applications
• Ability to meet demanding project timelines
• Highly competitive pricing

Call us on 1800 811 818 or email sales@gregorb.sg-host.com

Industrial Measurement and Control

Position and displacement sensors

Including potentiometers, magnetostrictives, rotary and inclinometers.

Strain and Force gauge sensors

Load cells.

Humidity measurement sensors

Including dew point and moisture, for industrial and HVAC applications.

Co2 transmitters

Wall and duct mount.

Signal conditioning devices

For the process industry within temperature, I.S. interfaces, panel meters, signal isolators and converters.

Handheld test tools and data loggers For temperature, humidity, speed (RPM), PH level, vibration, power analysers, light, water analysis

Customised products

Controllers to meet your precise requirements.

Environmental Monitoring and Thermal Validation

Environmental monitoring

Environmental monitoring is a must in applications where temperature is critical – for items stored in a fridge or freezer, or products that are subject to a cooking or heat treatment process.

Our automated environmental monitoring systems:

• measure and record the internal
  temperature of a controlled
  environment.

• measure and record the core
  temperature of products as they
  are stored or processed.

We provide wireless and hardwired automated monitoring systems, with alarm notifications to alert staff when the temperature of the storage unit (or process) deviates from a desired temperature range.

We provide solutions for:

Product protection – for products such as vaccines, biologics and food products, whose integrity and cost effectiveness depends on temperature. We protect them from spoilage and food-borne illness, during storage, shipping and handling.

Early detection of failures – monitoring to detect mechanical or electrical failures that impact storage temperature (for example in a fridge/freezer). Our systems send alarms to enable rapid action.

Regulatory compliance – vaccines, biologics and food are subject to strict regulatory controls for temperature, humidity, light exposure and more. Our temperature monitoring system can be used during an audit process to demonstrate compliance to these regulations.

Quality control – Environmental monitoring is critical to maintaining product quality in pharmaceutical, biotech, blood banks, emergency medical service and food distribution.

Process efficiency – our solutions automate regular temperature checks, replacing manual checks, which are time consuming and error prone. Our automated monitoring can record temperatures at a predetermined interval (typically every few minutes) 24×7 and enable remote monitoring, from any location.

Calibration

When you use measurement devices, you must be able to show that they are accurate, through a calibration process. For many temperature dependent processes, a simple laboratory calibration is not enough – you will need an ISO 17025 certification from the National Association of Testing Authorities (NATA), showing that you meet the standards of the National Measurement Institute (NMI) and/or the National Institute of Standards and Technology (NIST).

Discuss your calibration needs

Fully traceable to NMI/NIST standards
ECEFast offers a fully compliant calibration service. We compare your device to a reference measurement device, which has, in turn, been calibrated against another reference device from NMI/NIST. This gives you an unbroken chain to the national standards and a proof of calibration that is defendable in law. We are certified by NATA to ISO 17025.

Calibration at our place or yours

In-house laboratory – we can calibrate your equipment at FastLab, our NATA accredited measurement laboratory (No. 5473), for temperature and humidity. It is located at our premises in Notting Hill, Victoria. In the tightly controlled laboratory environment, our range of calibration devices and reference standards enables us to certify sensors from -196°C to 1300°C, instruments across all ranges and enclosures over the range of -196°C to 1300°C

ECEFast is the ONLY Australian manufacturer with an in-house calibration laboratory.

Our Services

Expert advice – our temperature engineers will work with you to design the best solution
for your requirements.

Customisation – if your requirements can’t be met ‘off the shelf’, we’ll customise a
solution just for you.

Installation and training – we’ll install the products and train your teams so you can get
the best from your temperature control solution.

Change management – if you need configuration updates or changes, we’ll manage
them for you.

Warranty and maintenance – we’ll carry out regular servicing to prevent most
problems. If you do have an issue, we’ll swap or repair the equipment as part of our
operational maintenance service.