"*" indicates required fields
TECHNICAL ADVICE & SUPPORT*
1800 811 818
Custom Quote in 24 hours
Lutron 3 phase power analyser – Harmonic measurements & Colour Display
Lutron DW-6195 ,3 Phase Power Analyser is an affordable basic power analysis, and fault finding. Ready to use kit for measuring all power parameters on industrial installations to 1200 amp, complete with clamp probes, test leads, and alligator clips. Built in SD card data logger, no special software needed, just download data to spreadsheet for analysis. As well as measuring transient waveforms, peak power requirements, detection of power factor problems, balance phases and identify supply faults such as wave form distortion, harmonics, breaks and surges.
- Analysis for 3 phase multi-power system, 1P/2W, 1P/3W, 3P/3W, 3P/4W.
- AC parameters, Power Factor, Phase, Frequency, Active, Apparent Power, Reactive Power /Peak Value and Crest Factor of AC voltage and current.
- Voltage Ranges: 10 ACV to 600 ACV, auto range.
- Current probe Input (ACV)Ranges: 200mV / 300mV / 500mV / 1V / 2V / 3V.
- Current probe Input (ACA)Ranges: 20A / 200A / 2000A / 30A / 300A / 3000A/60A/600A/6000A
- Display: TFT LCD Colour screen with back light
- Display waveform, harmonics, total harmonic distortion (THD), Graphic phase diagram
- Safety Standard IEC 1010 CAT III 600V
- Built-in clock and Calendar, real time data record with SD memory card.
- Transients recorded such as dip, swell and outage with programmable threshold (no saved waveform).
- Optional PC software available
- Measurement: / V (phase-to-phase), V (phase-to-ground), A (phase-to-ground) / KW / KVA / KVAR / PF (phase), KW / KVA / KVAR / PF (system) / KWH / KVAH / KVARH / PFH (system), Phase angle, Harmonics display (1-50th order).
- 3 phase Voltage or Current Unbalanced Ratio (VUR, AUR) and Unbalanced Factor.
- Calculated Unbalanced Current through Neutral Line (An).
- Programmable CT ratio (1 to 600) and PT ratio (1 to 1000).
- ACV input impedance is 10 MΩ.
- Safety Standard: IEC 1010, CAT III 600V.
- Built-in clock and Calendar, real time data record with SD memory card, sampling time set from 2 to 7200 seconds. Just slot in the SD card into the computer, it can download the all the measured value with the time information (year, month, data, hour, minute, second) to the Excel directly, then user can make the further data analysis by themselves.
- Powered: AA 1.5 V X 8 batteries or DC 9V adapter.
- Instruction manual
- Test Leads (TL88-4AT)1 Set (4 PCs)
- Alligator clips (TL88-4AC) 1 Set (4 PCs)
- Clamp Probe (CP-1201) X 3 PCs
- AC to DC 9V adapter
- SD card
- Carrying bag
- 2000 Amp current probe, CP-2000
- 200Amp current probe, CP-200
- 1200 Amp current probe, CP-1201
- Flexible 3000 Amp current probe, CP-3000, CPF-3002, CP-3001, CP-6001
- USB Cable, USB-01
- Data Acquisition software, SW-U811