Product Enquiry
"*" indicates required fields
Load Cells | Load Cells & Force Gauges Products
TECHNICAL ADVICE & SUPPORT*
1800 811 818
Custom Quote in 24 hours
Gefran SH shear type load cell
GF-SH
The principle of measurement of the SH series load cells is the deformation caused by the shear generated by the applied load. The high degree of accuracy, good level of thermal compensation, and the grade of protection make the SH series load cells safe for use in the most severe conditions.
- Range of measurement: from 500 to 10,000 Kg
- Accuracy class: D1 (OIML IR60)
- All stainless steel construction
- Corrosion resistant
- Insensitive to lateral loads
- Grade of protection: IP66 (DIN 40050)
Product Overview:
Specifications:
- Accuracy: D1
- Divisions:1000
- Nominal full-scale load (Ln): 500...10.000 kg
- Nominal output at FSO:2mV/V
- Output tolerance at Ln: <± 0,2% FSO
- Combined errors: Non linearity Hysteresis, Repeatability: < ± 0,05% FSO
- Creep (after 30 min. at Ln): < ± 0,05% FSO
- Zero load out of balance signal: < ± 1% FSO
- Nominal input resistance: 350 Ohm
- Nominal output resistance: 350 Ohm
- Nominal supply voltage: 10 V
- Compensated temperature range: -10...+40°C
- Maximum temperature range: -20...+60°C
- Permitted static load: 130% Ln
- Permitted dynamic load: 100% Ln
- Maximum applicable load: 150% Ln
- Electrical connections screened cable: 4x0,25 / 5 m
- Elastic element material: Stainless steel
Supplier link: https://www.gefran.com/products/strain-and-force-sensors/force/sh-standard-profile-load-cell/
Data Sheets
GF-SH_Data_Sheet
GF-Load Cells_Data_Sheet
