Product Enquiry
"*" indicates required fields
TECHNICAL ADVICE & SUPPORT*
1800 811 818
Custom Quote in 24 hours
Comark Pressure / Manometers for DRY USE
Our range of Dry Use Pressure Meters are designed for use in applications where the necessary measurement being taken has only air or non-corrosive gas on both the positive (+) and negative (-) pressure ports.
Common Applications include high pressure test & measurement applications, such as in clean-rooms, isolation rooms, filter status, leak detection and stairwell pressurization.
The Comark C9500 series Dry Use Pressure Meters combines high accuracy with speed of response and is designed to function between the pressure range with twin inputs for positive/negative gauge or differential pressure measurement.
Pressure units: PSI, mbar, inH2O, inHg, mmHg, torr, kPa, cmH2O, Kgcm-2
| Pressure Measurement Range | 0 to ±7000 mBar |
| Resolution | 0.1 to 1mBar |
| Accuracy | ±0.2% of full scale (FS) at +23°C |
| Repeatability | ±0.1% of full scale (FS) at +23°C |
| Mean Temperature Coefficient of Reading | <0.1% per °C |
| Operating Temperature Range | 0 to 50°C |
| Humidity Range | 10 to 90% RH non-condensing |
| EMC | Tested to EN61326-1 Criteria B performance |
| Environmental Protection | IP67, BS:EN60529, IEC529 |
| Battery | *9V PP3 6F22 — MN1604 UCAR9V |
| Low Battery Warning | Displays BAT just before end point of battery |
| Over Pressure Indication | – – – – |
| Over 9999 Reading Indication | Lowest 4 digits blink |
| Connections | 1/8" BSP female |
Data Sheets
Data_Sheet_S9500Dry
