PR Electronics Universal 2-wire HART transmitter

Application

• Linearized temperature measurement with Pt100...Pt1000, Ni100...Ni1000, or TC sensor.
• Difference or average temperature measurement of 2 resistance or TC sensors.
• Conversion of linear resistance variation to a standard analog current signal, for instance from valves or Ohmic level sensors.
• Amplification of a bipolar mV signal to a standard 4...20 mA current signal.
• Connection of up to 15 channels to a digital 2-wire signal with HART communication.

Technical characteristics

• Within a few seconds the user can program PR6335A to measure temperatures within all ranges defined by the norms.
• The RTD and resistance inputs have cable compensation for 2-, 3- and 4-wire connection.
• The 6335A has been designed according to strict safety requirements and is thus suitable for application in SIL installations.
• A limit can be programmed on the output signal.
• Continuous check of vital stored data for safety reasons.
• Sensor error detection according to the guidelines in NAMUR NE89.

Mounting / installation

• Mounted vertically or horizontally on a DIN rail. Using the 2-channel version up to 84 channels per metre can be mounted.
• Configuration via standard HART communication interfaces or by PR 5909 Loop Link.
• The 6335A can be mounted in zone 2, 22 / Class I, Division 2, Groups A, B, C, D.

Further information
Supplier Product Page link: https://www.prelectronics.com/products/temperature-transmitters/6300/2-wire-hart-transmitter-6335a/