Custom Order Products in 24 Hours

1800 811 818

Introducing ECEFast's
Sensor Range

Explore our sensors now
Load Cells | Load Cells & Force Sensors | Pressure & Force Measurement Products

TECHNICAL ADVICE & SUPPORT*

1800 811 818
Custom Quote in 24 hours

Gefran CT toroidal force transducer

GF-CT

The CT series force transducers have been specially designed for use in polymer processing in applications where it is required to measure the reaction force produced by the extrusion pressure on the gearbox along the axis of the screw. They measure a force whose value is indicative of the extrusion pressure over the area of the screw.

  • Range of measurement: from 100 to 3000 kN
  • Accuracy class: 0.5%
  • Elastic element in stainless steel
  • Corrosion resistant
  • Internally generated calibration signal
  • Grade of protection: IP65 (DIN 40050)

Product Overview:

Specifications:

  • Accuracy: 0,5%
  • Nominal full-scale load (Ln): 100…3000 kN
  • Nominal output at FSO:2mV/V
  • Output tolerance at Ln: <± 1% FSO
  • Combined errors: Nonlinearity Hysteresis, Repeatability: < ± 0,5% FSO
  • Creep (after 30 min. at Ln): < ± 0,06% FSO
  • Zero load out of balance signal: < ± 1% FSO
  • Calibration signal: 80%FSO ± 1%
  • Nominal input resistance: 700 Ohm
  • Nominal output resistance: 700 Ohm
  • Nominal supply voltage: 10 V
  • Compensated temperature range: -20...+50°C
  • Maximum temperature range: -20...+60°C
  • Permitted static load: 130% Ln
  • Maximum applicable load: 150% Ln
  • Maximum elastic deformation at Ln: < 0,1 mm
  • Electrical connections: VPT02A10-6PT2
  • Elastic element material: Stainless steel
  • Case material: Anodize aluminum

Supplier link: https://www.gefran.com/products/strain-and-force-sensors/force/ct-2-toroidal-force-transducer/

Data Sheets

GF-CT_Data_Sheet

GF-Load Cells_Data_Sheet

Accessories