Custom Order Products in 24 Hours

1800 811 818

Introducing ECEFast's
Sensor Range

Explore our sensors now
Flow Measurement | Flow Sensors & Switches | Mass Flow Meters (Air & Gas) Products

TECHNICAL ADVICE & SUPPORT*

1800 811 818
Custom Quote in 24 hours

E+E Elektronik Flow Sensor for Compressed Air and Gases

EE771

The EE771 is a thermal flow sensor for Compressed Air and Gases. The flow sensor can measure the consumption of compressed air, nitrogen, oxygen, CO₂, argon or other non-corrosive gases.

  • Measurement ball valve for rapid installation and removal with only a short flow interruption
  • Remote, interchangeable probe for easy mounting
  • Pipe diameter DN15 – DN50 (1/2″ – 2″)
  • Pressure ranges up to 16 bar (232 psi) PN16
  • Wide measuring range up to 200 Nm/s (39370 SFPM)
  • Bus interface for MODBUS RTU or M-BUS

The flow sensor can measure the consumption of compressed air, nitrogen, oxygen, CO₂, argon or other non-corrosive gases. The measurement ball valve permits easy installation and removal with only a short interruption of the flow.

EE771 flow sensor employs the well proven E+E hot-film sensor element with high immunity to contamination, which leads to outstanding long-term stability and accuracy even under harsh operating conditions.

With wide measuring range from 0.5 to 200 Nm/s (100...39370 SFPM) (1:400) and fast response time, one and the same flow meter model can be employed throughout the entire gas supply system. It records accurately even the smallest flow which represent an essential prerequisite for calculating consumption costs or for finding leaks.

Every E+E flow sensor undergoes a precise factory calibration procedure at a pressure of 7 bar (102 psi), the corresponding calibration certificate is included in the standard scope of supply.

  • Measured values: standardized volumetric flow, mass flow, standardised flow, temperature, consumption
  • Measuring range :0.5 - 200 Nm/s (100…39370 SFPM)
  • Accuracy: ±1.5 % of the measured value
  • Pipe diameter: DN15 up to DN50 (1/2" - 2")
  • Outputs :0-10 V, 0/4-20 mA, Pulse, Switch, Modbus RTU or M-Bus
  • Supply :18 - 30 V AC/DC

Supplier link: https://www.epluse.com/products/flow-meter/mass-flow-meter-for-air-and-gas/ee771/              

Data Sheets

EE771 _Data_Sheet

Accessories