Custom Order Products in 24 Hours

1800 811 818

Introducing ECEFast's
Sensor Range

Explore our sensors now
Differential Pressure | DP Handheld Meters | Pressure & Force Measurement Products

TECHNICAL ADVICE & SUPPORT*

1800 811 818
Custom Quote in 24 hours

Comark Pressure / Manometers – Intrinsically Safe

Comark KM-9500 Ex/I.S

Our Intrinsically Safe Pressure Meters contain impregnated protection, designed to limit electrical discharge as well as the surface temperature of the device, in order to prevent the possible ignition of a volatile gases, dust or vapours.

The Comark range of Intrinsically Safe Manometers are ATEX compliant, certified to Ex II 1G Ex ia IIC T4 Ga and Baseefa 03ATEX0079 and are therefore recommended for use in areas where explosive or flammable substances are stored or processed. These pressure meters have been approved by internationally recognised approval bodies to intrinsic safety requirements.

Pressure units: PSI, mbar, inH2O, inHg, mmHg, torr, kPa, cmH2O, Kgcm-2

Pressure Measurement Range0 to ±7000 mBar
Resolution0.1 to 1mBar
Accuracy±0.2% of full scale (FS) at +23°C
Repeatability±0.1% of full scale (FS) at +23°C
Mean Temperature Coefficient of Reading<0.1% per °C
Operating Temperature Range0 to 50°C
Humidity Range10 to 90% RH non-condensing
EMCTested to EN61326-1 Criteria B performance
Environmental ProtectionIP67, BS:EN60529, IEC529
Battery*9V PP3 6F22 — 6F22REL

*IS models must only use Zinc Chloride Battery

Low Battery WarningDisplays BAT just before end point of battery
Over Pressure Indication– – – –
Over 9999 Reading IndicationLowest 4 digits blink
Connections1/8" BSP female

 

Further Information

https://www.comarkinstruments.net/product-category/products/pressure-measurement/pressure-meters-manometers/

Data Sheets

Data_Sheet_9500 Ex/I.S

Accessories